Palisade Fence
1. Introduction:
It is widely accepted as the industry leader to protect and deter general attack from all types and conditions of intrusion.The pales are made of hot formed and cold rolled steel belts.These belts offer both strength and rigidity combined with a long life span.
2. Types:
Palisade fence normally produce three types of pales, "W" profile, "D" profile and angle iron :
3. Specification of the galvanized palisade fence :
1)Heights: 2100mm, 2400mm and 3000mm heights are available.
2) Paling Profiles: Available in 2 standard profiles - 'W' profile and 'D' profile.
3)Paling Tops: Available in 5 standard tops; Single point - Triple point - Square - Round - Notched
4)Paling Thickness: Available in 3 standard gauges; 2.0MM - 2.5MM - 3.0MM
5) Horizontals:
vailable in 2 standard sizes according to height and site requirements - 50x50x6mm or 65x50x6mm
6) Posts:
100x55 IPE (European steel I-beams)
Available with welded fishplates or slotted for use with loose fishplates. Can be concreted-in, base plated for bolting down or cranked. Posts can be vertically extended to accommodate barbed or razor wire.
7)Panels:
2750mm wide panels (centre post-to -centre post) can be easily raked to allow for most site conditions.
8)Fixings:
All fixings are tamper-proof and anti-vandal. M8x25LG 'T' HD bolts & cones.
9)Fixings per post:
2100mm (H) - 102x44
2400mm (H) - 102x44
3000mm (H) - 127x76
5.Pales-"W" section:
Most useful vetical type of pales for palisade fencing, which is always the customers' first choice for pales .
6.Pales-"D" section:
Compared with "W" profile pales, "D" profile is more economical.
7.Variations:
In addition to the standard posts many variations are available, such as to accranked or straight extensions for barbed or razor wire
8.crankcommodate site requirements:
1]wall fixing plates, cranked posts or base plated
2]with ed panels
9.Angle Iron
It is the connection between pales and IPE post, which make the fence as a whole panel.
Size |
Thickness |
Surface Treatment |
Holes |
Length |
50x50 40x40 |
5.0mm 6.0mm |
Galvanized and Electrostatic polyester coated or Hot dipped galvanized |
With19 holes drilled on one edge side |
2710mm |
10. Fittings- Fish plate, Bolts & Nuts(M8,M12)
Fish plate is used as the connection between the IPE post and the angle rail.
11. General Use:
*Electricity Providers and Regional Networks
*Water Industry
*Elecoms Industry
*Police and Law enforcement
* Railway Line/Track Protection
*Motorways and Highway Protection
*Channel tunnel and European Transport networks
*Schools, Colleges & Universities
*Research Laboratories